Aluminum and Steel Fence Installation in Lawrence, KS

We install aluminum and steel fences in Lawrence, KS that provide elegant, low maintenance security for your home. These ornamental metal fences are ideal for front yards, pools, and property lines where visibility and style matter. Powder coated finishes resist rust and fading for long term beauty. Contact us for a free quote on aluminum or steel fencing today.

Legendary Fence Company Lawrence provides professional aluminum fence throughout Lawrence, KS, Kansas and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 785-367-3505 or request your free quote.

Aluminum and Steel Fences Built for Lawrence, KS Properties

Aluminum and steel fences are popular around Lawrence because they hold up well to Kansas wind, sun, and temperature swings, and they do it without much upkeep. At Legendary Fence Company Lawrence, we focus on aluminum and steel fence installation that fits how people here actually use their yards, from tight city lots near downtown to larger properties closer to the county line.

Aluminum fencing is usually the better choice when you want the look of wrought iron without the rust or maintenance. It is lighter, powder coated, and comes in many styles, from simple flat-top pickets to more decorative options. Steel fencing is heavier and stronger, which makes it a good fit for higher security areas, commercial sites, or spots that see more impact risk, like along busy driveways.

We start every aluminum or steel fence project with a site visit, not just an online estimate. We walk the property line with you, look at slopes and low spots that collect water, and note where utilities and sprinkler lines are. Lawrence soil can shift and hold water in certain areas, and that affects how deep we set posts, what concrete mix we use, and where we may need drains or small grade adjustments to keep the fence stable over time.

From there, we talk through how you actually plan to use the fence. If you are keeping kids and pets in, we look at picket spacing and height. If privacy and security are bigger concerns, we talk about taller panels, more robust posts, and locking gates. That way, the fence is not just attractive, it actually solves the problem you are paying to fix.

Design Choices, Styles, and Finishes for Your Aluminum Fence

With aluminum and steel fences, most of the cost and look comes from the design details you choose. Legendary Fence Company Lawrence works with regional fabricators, so we have a wide range of panel styles and can also handle custom pieces when needed.

For residential aluminum fences in Lawrence, the most common heights are 4, 5, and 6 feet. Four foot fences often go in front yards or around pools. Five and six foot fences are typical for backyards where you want more security and a clear property line. We can match or complement existing fences on neighboring properties so your yard does not stick out in a way that upsets neighbors or HOAs.

Picket styles include flat-top, spear-top, and alternating or decorative tops. Flat-top works well when you want a clean, modern line or plan to mount puppy panels along the bottom to keep small dogs in. Spear-top adds a deterrent to climbing and gives a more traditional look. For homes near historic parts of Lawrence, like older neighborhoods around the university, we can suggest aluminum profiles that echo older wrought iron without the cost and rust concerns.

Finish color is usually a durable powder coat, most often black, but bronze, white, and custom tones are often available. Black tends to disappear visually against trees and shadows, while bronze works well against lighter siding or stone. Powder coating is important in Kansas because it resists fading and chipping from strong summer sun and winter road salts.

We also plan gate placement and style as part of the design, not as an afterthought. Walk gates should line up with existing walkways or the most direct path you actually use. Drive gates must match your driveway width and turning radius. If you are considering an automatic opener, we plan for power, clearance, and equipment placement during design so you are not tearing up new concrete later.

How Our Aluminum and Steel Fence Installation Process Works

Proper installation is what separates a fence that looks good for a year from one that performs for decades. Legendary Fence Company Lawrence follows a consistent process so you know what to expect from first meeting to final walk through.

After the initial site visit and design choices, we mark all fence lines on the ground with paint and flags. We always call Kansas 811 before digging so underground lines are marked, and we ask you to show us sprinkler heads and any private utilities like yard lighting. Lawrence yards often have shallow irrigation lines, so we dig carefully by hand in suspect areas to avoid damage.

Post holes are typically dug 24 to 36 inches deep, depending on fence height, soil conditions, and wind exposure. In open areas that see strong south Kansas winds, or for taller steel fences, we may go deeper or use larger diameter holes. We use concrete to set posts, and we bell out the bottom of the holes in softer soil so posts resist heaving when the ground freezes and thaws.

We set posts to a tight string line so the fence looks straight from every angle. On sloped yards, you can choose between racking panels (where pickets stay vertical and the rails follow the slope) or stepping panels (where sections are level but stair-step up or down the grade). Racked panels usually look cleaner and keep gaps smaller under the fence, which matters if you have small pets.

Panels and rails are then attached once the concrete has taken a set. We check alignment, level, and spacing as we go, rather than waiting until the end. Gates are installed last, because we want the fence line stable before we hang and adjust hardware. We use adjustable hinges and quality latches, and for pool or security applications we can install self-closing hinges and keyed or combination locks.

Before we leave, we walk the entire fence line with you, test every gate, and point out how to inspect and maintain key parts like hinges and latch hardware. We also go over what to expect as the concrete cures and how to avoid issues, such as not leaning heavy items against the fence for a few days.

Permits, HOA Rules, and Local Considerations in Lawrence, KS

Lawrence has specific rules that can affect aluminum and steel fence installation, and Legendary Fence Company Lawrence helps you navigate them so you do not run into surprises after the work is done.

Within Lawrence city limits, front yard fences usually have stricter height limits than rear or side yards, and corner lots often have special sight line requirements near intersections and driveways. If you are near a sidewalk or alley, there may be setback requirements that keep the fence a certain distance off the property line. We recommend you have a current survey or property line markings, especially in older neighborhoods where markers may have moved or disappeared.

If your property is near drainage easements, creeks, or utility easements, the city or utility companies may limit where posts can be placed or require a specific style of fence that does not block water flow. In these areas, aluminum is often a better choice than solid fencing because it lets water pass through while still defining the property.

For many residential aluminum fences that meet height and location rules, Lawrence may not require a full building permit, but pool fences and some taller or commercial fences usually do. When a permit is needed, we can help gather drawings, product specs, and site plans for your application. We also coordinate with inspectors when required, so installation matches what the city has approved.

HOAs around Lawrence, including newer subdivisions on the west side of town, often have their own fence rules. Common restrictions include approved colors (typically black aluminum), maximum heights, and sometimes specific panel designs. Some HOAs only allow open picket styles along shared green space or ponds. We review your HOA guidelines, help you choose an aluminum or steel fence that meets their standards, and can provide product cut sheets or drawings when an architectural committee asks for them.

If your fence will border a neighbor, we suggest talking with them before we start. In some cases, neighbors split costs, or at least agree on style and height so there are no disputes later. We can provide clear layout drawings so everyone understands where the fence will sit relative to property lines.

Costs, Longevity, and How to Decide Between Aluminum and Steel

The cost of aluminum and steel fence installation in Lawrence depends on several practical factors: total linear footage, height, style complexity, number of gates, ground conditions, and any special hardware or automation. Legendary Fence Company Lawrence gives itemized estimates so you can see how each choice affects the budget.

Aluminum fencing is usually more economical for most residential yards, especially in standard heights and styles. It is lighter, which reduces some labor, and powder coated aluminum does not rust, which keeps long term care simple. Steel is generally more expensive and heavier to install, but it provides higher strength and is often the right call for commercial properties, industrial yards, or high traffic areas where impact resistance matters.

Local site conditions in Lawrence can add or reduce cost. Rocky soil, heavy roots, or tight access that requires hand digging instead of machine augers will increase labor. Sloped yards that need stepped or custom racked panels can cost more than straight, level runs. Additional gates, especially wide drive gates or automated systems, also add to the total.

Maintenance is where aluminum usually saves money over time. Routine care is limited to rinsing off dirt, checking bolts and hinges once or twice a year, and touching up any visible scratches on steel components before rust can start. For aluminum, rust is not an issue, which is one reason many Lawrence homeowners choose it for pool areas and backyards exposed to sprinklers.

When deciding between aluminum and steel, we suggest you consider three main questions: How much strength do you really need, what style fits your home and neighborhood, and how long do you plan to stay in the property. If you need strong security along a commercial lot line near a busy road, steel may be the right choice. If you want a clean, low maintenance fence that frames a backyard and keeps pets in, aluminum is usually the better value.

During your estimate, we can price both aluminum and steel options side by side and explain which parts of the project drive the numbers. That way you can choose based on facts, not guesswork, and end up with a fence that works well in Lawrence weather, respects local rules, and fits your budget.